Ford Kuga

 Owners Manual

Cruise Control
Using Cruise Control

WARNINGS

• Do not use cruise control in heavy traffic, on winding roads or when the road surface is slippery. This could result in loss of vehicle control, serious injury or death.
• When you are going downhill, your vehicle speed may increase above the set speed. The system will not apply the brakes. Change down a gear to assist the system in maintaining the set speed. Failure to do so could result in loss of vehicle control, serious injury or death.

Note: Cruise control will disengage if your vehicle speed decreases more than 10 mph (16 km/h) below your set speed while driving uphill.

The cruise control switches are located on the steering wheel.

Switching Cruise Control On

Press and release ON.

The indicator will display in the instrument cluster.

Setting a Speed

1. Accelerate to the desired speed.

2. Press and release SET+.

3. Take your foot off the accelerator pedal.

Changing the Set Speed

• Press and hold SET+ or SET-. Release the control when you reach the desired speed.
• Press and release SET+ or SET-. The set speed will change in approximately 1 mph (2 km/h) increments.
• Press the accelerator or brake pedal until you reach the desired speed. Press and release SET+.

Canceling the Set Speed

Pull CAN toward you and release, or tap the brake pedal. The system will not erase the set speed.

Resuming the Set Speed

Pull RES toward you and release.

Switching Cruise Control Off

Note: You will erase the set speed if you switch the system off.

Press and release OFF or switch the ignition off.

Using Cruise Control

Using Adaptive Cruise Control