Ford Kuga
Service Manual
Anti-Theft - Passive
Anti-Theft - Passive

Refer to Wiring Diagrams Section 419-01B, for schematic and connector information.

General Equipment

The Ford approved diagnostic tool

Inspection and Verification

1. Verify the customer concern.

2. Visually inspect for obvious signs of mechanical or electrical damage.

Visual Inspection Chart

Mechanical	Electrical
Ignition lock cylinder Passive anti-theft system (PATS) tranceiver PATS ignition key Use of a nonencoded PATS ignition key More than one PATS key in close proximity of the PATS transceiver Powertrain control module (PCM) Keyless vehicle module Instrument cluster	Fuse(s) Wiring harness Electrical connector(s) Relay(s) PCM PATS transceiver Ignition switch Instrument cluster Keyless vehicle module PATS ignition key

3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.

4. If the cause is not visually evident, verify the symptom and refer to the Ford approved diagnostic tool to diagnose the system.

More about «Anti-Theft - Passive»:

Anti-Theft - Passive (Component Location)