Removal
NOTE: Removal steps in this procedure may contain installation details
1. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
2. Remove the following items: 1. Refer to: Accessory Drive Belt (303-05 Accessory Drive - 2.5L Duratec (147kW/200PS) - VI5, Removal and Installation).
2. Refer to: Air Cleaner (303-12 Intake Air Distribution and Filtering - 2.5L Duratec (147kW/200PS) - VI5, Removal and Installation).
3. CAUTION: Make sure that the inside of the pipe ends are clean and free of oil residue.
5. NOTE: The O-ring seals are to be reused unless damaged. Torque: 10 Nm
6. Torque: 10 Nm
7. NOTE: Install all the bolts finger tight before final tightening.
1. Torque: 15 Nm
2. Torque: 25 Nm
Installation
1. To install, reverse the removal procedure.
2. Refer to: Door Window Motor Initialization (501-11 Glass, Frames and Mechanisms, General Procedures).