Supplemental Restraint System » Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) -
Vehicles
Built From: 06/2004
Inspection and Verification
1. Verify the customer concern by operating the
system.
2. Visually inspect for obvious signs of mechanical
or electrical damage.
Visual Inspection Chart
Electrical
- Fuse(s)
- Loose or corroded electrical connector(s)
- Circuit(s)
- Safety belt buckle switch
- Passenger seat mat minder
- Safety belt pretensioners
- Driver frontal air bag
- Passenger frontal air bag
- Driver and passenger side air bags (if
equipped)
- Driver and passenger side air curtains (if
equipped)
3. If an obvious cause for an observed or reported
concern is found, correct the cause (if possible)
before proceeding to the next step.
4. If the cause is not visually evident, verify the
symptom and refer to the diagnostic tab within
the Ford approved diagnostic tool.
More about «Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) -
Vehicles
Built From: 06/2004»:
Inspection and Verification