Ford Kuga

 Service Manual

Paint - General Information » Additional Materials
Paint additives

Maintain maximum layer thickness without fail.

Must always next be overpainted with clear lacquer.

Cannot be used in all paints, read the manufacturer's instructions.

Particularly suitable for partial painting.

CAUTION: Do not dry using infrared.

Note:

When mixing, first put in the matting additive, then the hardener and thinners.

• Stir immediately after adding the matting additive.
• Do not store after addition of the matting additive, storage will change the degree of gloss.
• Also suitable for use on plastics without addition of elastifier additive.

Note:

The paint must not be filtered.

Note:

• Only add away from the paint cabin and immediately remove contaminated cloths.
• If anti-silicone additive is used in the first coat, then it must be used in the following coats, and in at least the same proportions.

Adhesive sealants

Underbody protection

Paint additives

Additive materials