Ford Kuga

 Service Manual

Automatic Transmission/Transaxle External Controls
Selector Lever Cable - Vehicles With: 5-Speed Automatic Transaxle - AW55 AWD

General Equipment

Knife

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Refer to: Health and Safety Precautions (100-00 General Information, Description and Operation).

3. Refer to: Lifting (100-02 Jacking and Lifting, Description and Operation).

8. Lower the Vehicle.

9. Refer to: Floor Console Extension - Vehicles With: Center Armrest (501-12 Instrument Panel and Console, Removal and Installation).

11. Torque: 25 Nm

13.Torque: 25 Nm

15.Torque: 9 Nm

18. General Equipment: Knife

19.Torque: 9 Nm

Installation

CAUTION: Gearshift cables must not be kinked or bent.

1. To install, reverse the removal procedure.

2. 1. Torque: 25 Nm

2. Torque: 25 Nm

3. Torque: 30 Nm

4. Torque: 25 Nm

3. Refer to: Selector Lever Cable Adjustment - Vehicles With: 5-Speed Automatic Transaxle - AW55 AWD (307-05 Automatic Transmission/Transaxle External Controls - Vehicles With: 5-Speed Automatic Transaxle - AW55 AWD/6-Speed Automatic Transaxle - 6DCT450, General Procedures).

External Controls (Component Location)

External Controls (Overview)

Selector Lever Cable Adjustment-Vehicles With: 5-Speed Automatic Transaxle - AW55 AWD

Selector Lever Cable - Vehicles With: 5-Speed Automatic Transaxle - AW55 AWD

Selector Lever Assembly - Vehicles With: 5-Speed Automatic Transaxle - AW55 AWD