Ford Kuga

 Owners Manual

Driving Aids
Speed Limiter

Principle of Operation

WARNING

When you are going downhill, your speed may increase above the set speed. The system will not apply the brakes but a warning will be given.

The system allows you to set a speed, to which your vehicle then becomes limited.

The set speed will become the effective maximum speed of your vehicle, but with the option to temporarily exceed this limit if required.

Using the System

Note: The set speed limit can be intentionally exceeded for a short period of time if required, for example when overtaking.

The system is operated by adjustment controls mounted on the steering wheel.

A Set speed increase

B On and off

C Set speed decrease

D Cancel and resume

Switching the System On and Off

Press switch B. The information display will prompt you to set a speed.

Setting the Speed Limit

Use the cruise control switches to alter the maximum speed setting.

Press switch A or C to select your desired speed limit. The speed is displayed in the information display and stored as the set speed.

Pull switch D to cancel the limiter and place it in standby mode. The information display will confirm this has been turned off by showing the set speed crossed out.

Pull switch D again to resume the limiter.

The information display will confirm this has been turned on by showing the set speed again.

Intentionally Exceeding the Set Speed Limit

Depress the accelerator fully to temporarily turn the system off. The system will turn on once your vehicle speed drops below the set speed.

System Warnings

If you accidently exceed the set speed, it will flash in the information display and you will hear and audible warning chime.

If you intentionally exceed the set speed, it will flash in the information display.

Speed Limiter

Driver Alert

Lane Keeping System

Blind Spot Information System

Traffic Sign Recognition

Active City Stop

Eco Mode