Ford Kuga

 Service Manual

Transfer Case
Transfer Case (System Operation and Component Description)

System Operation

NOTE: From the start of series production, the transfer box will be subject to a "Black Box Phase" and will therefore not be repaired.

To realise the all-wheel drive, a transfer box has been flange-mounted to the manual transaxle. The transfer box is designed as an angular gear to transfer the torque from the transaxle to the rear axle. The hollow shaft of the transfer box is inserted in a tooth on the gear case. From the hollow shaft, torque is transferred to the driveshaft through the output shaft/output flange via crown gear and differential pinion gear.

Transfer Case (Component Location)

Transfer Case (System Operation and Component Description)

Transfer Case Fluid Level Check

Transfer Case Connecting Sleeve

Transfer Case Connecting Sleeve Seals - Vehicles With: 5-Speed Automatic Transaxle - AW55 AWD

Transfer Case Rear Seal

Transfer Case Seal LH

Transfer Case Seal RH

Transfer Case