Ford Kuga

 Service Manual

General Information » Standard Workshop Practices
Vehicle in Workshop

When working on a vehicle in the workshop always make sure that:

• the parking brake is applied or the wheels are securely chocked to prevent the vehicle moving forwards or backwards.
• the key is removed from key operated hood locks before any work is carried out around the front of the vehicle.
• if the engine is to be run, there is adequate ventilation, or an extraction hose to remove exhaust fumes.
• there is adequate room to raise the vehicle and remove the wheels, if necessary.
• fender covers are always fitted if any work is to be carried out in the engine compartment.
• the battery is disconnected if working on the engine, underneath the vehicle, or if the vehicle is raised.

CAUTION: When electric arc welding on a vehicle, always disconnect the generator wiring to prevent the possibility of a surge of current causing damage to the internal components of the generator.

• if using welding equipment on the vehicle, a suitable fire extinguisher is readily available.

Vehicle in Workshop

Towing the Vehicle

Connecting a Slave Battery Using Jumper Cables