General Equipment
Adhesive Tape
Direct Glazing Removal/Replacement Equipment
Hot Air Gun
Knife
General Equipment
Laminated Card | |
Materials | |
Name | Specification |
Windshield Adhesive Kit | WSS-M11P57-A5 |
Removal
Material: Windshield Adhesive Kit (WSS-M11P57-A5) adhesive
5. Refer to: Rear Spoiler (501-08 Exterior Trim and Ornamentation, Removal and Installation).
CAUTION: Make sure that the cutting blades are changed where the cutting depth changes.
Use laminated card to prevent paint damages.
General Equipment: Direct Glazing
Removal/Replacement Equipment
General Equipment: Laminated Card
Installation
1. NOTE: Minimum 1 mm bead thickness. NOTE: Make sure that the mating faces are clean and free of foreign material.
NOTE: Touching the adhesive surface will impair rebonding.
General Equipment: Knife
General Equipment: Hot Air Gun
2. NOTE: This step is only necessary if the original component is to be reused.
NOTE: Minimum 1 mm bead thickness.
NOTE: Make sure that the mating faces are clean and free of foreign material.
NOTE: Touching the adhesive surface will impair rebonding.
General Equipment: Knife
General Equipment: Hot Air Gun
3. NOTE: Discard the first 100 mm of adhesive as this may have a reduced working time.
NOTE: Make sure that any breakage in the continuous bead of adhesive is overlapped by 20 mm.
General Equipment: Direct Glazing Removal/Replacement Equipment
Material: Windshield Adhesive Kit (WSS-M11P57-A5) adhesive
CAUTION: During the curing time of the polyurethane (PU) adhesive, the door windows must be left open.
General Equipment: Adhesive Tape
5. Refer to: Rear Spoiler (501-08 Exterior Trim and Ornamentation, Removal and Installation).
6. 1. Torque: 15 Nm
2. Torque: 8 Nm
7. Refer to: Liftgate Upper Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
2008.50