Toyota
Ford Kuga
 Service Manual
Climate Control
Heater Core - RHD(34 364 0)

General Equipment

Air Body Saw

Hose Clamp(s)

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Refer to: Brake System Health and Safety Precautions (100-00 General Information, Description and Operation).

2. Refer to: Engine Cooling System Health and Safety Precautions (100-00 General Information, Description and Operation).

3. Extract brake fluid from the brake fluid reservoir until the level reaches the MIN mark.

Heater Core - RHD(34 364 0)

4. Refer to: Cowl Panel Grille (501-02 Front End Body Panels, Removal and Installation).

Heater Core - RHD(34 364 0)

6. CAUTION: Make sure that all openings are sealed.

General Equipment: Hose Clamp(s)

Heater Core - RHD(34 364 0)

7.   CAUTION: Make sure that all openings are sealed

Heater Core - RHD(34 364 0)

8. Refer to: Floor Console (501-12 Instrument Panel and Console, Removal and Installation).

9. Torque: 9 Nm

Heater Core - RHD(34 364 0)

Heater Core - RHD(34 364 0)

11. Torque: 28 Nm

Heater Core - RHD(34 364 0)

12Torque: 28 Nm

Heater Core - RHD(34 364 0)

13LTorque: 25 Nm

Heater Core - RHD(34 364 0)

4. Refer to: Climate Control Assembly - Vehicles With: Manual Temperature Control (412-01 Climate Control, Removal and Installation). Refer to: Climate Control Assembly - Vehicles With: Automatic Temperature Control (412-01 Climate Control, Removal and Installation).

15 1. Torque: 10 Nm

2.  Torque: 25 Nm

Heater Core - RHD(34 364 0)

Heater Core - RHD(34 364 0)

17. 1. If equipped.

Heater Core - RHD(34 364 0)

Heater Core - RHD(34 364 0)

19.  WARNING: Be prepared to collect escaping fluid.

General Equipment: Air Body Saw

Heater Core - RHD(34 364 0)

Installation

Heater Core - RHD(34 364 0)

2. To install, reverse the removal procedure.

3. Check the coolant level.

Refer to: Cooling System Draining and Vacuum Filling (303-03 Engine Cooling, General Procedures).

    More about «Climate Control»:

    Condenser

    Clutch and Clutch Field Coil

    Pollen Filter - RHD

    Blower Motor - RHD(34 374 0)

    Blower Motor Resistor - Vehicles With: Manual Temperature Control, RHD(34 382 0)

    Blower Motor Resistor - Vehicles With: Dual Automatic Temperature Control(34 382 0)

    Heater Core and Evaporator Core Housing

    Heater Core - RHD(34 364 0)

    Suction Accumulator

    Suction Accumulator to Air Conditioning (A/C) Compressor Line

    Suction Accumulator to Air Conditioning (A/C) Compressor Line - 2.5L Duratec (147kW/200PS) - VI5

    Low-Pressure Cutoff Switch

    High-Pressure Cutoff Switch

    Evaporator

    Evaporator Outlet Line

    Evaporator Core Orifice

    Condenser to Evaporator Line

    Climate Control Assembly - Vehicles With: Manual Temperature Control(34 300 0)

    Climate Control Assembly - Vehicles With: Automatic Temperature Control(34 300 0)

    Footwell Air Discharge Temperature Sensor(34 485 4)

    Center Register Air Discharge Temperature Sensor

    In-Vehicle Temperature Sensor

    Footwell Vent/Duct Blend Door Actuator - RHD(34 591 0)

    Air Inlet Blend Door Actuator(34 606 0)

    Driver Side Temperature Blend Door Actuator(34 608 0)

    Passenger Side Temperature Blend Door Actuator(34 608 0)

    Defrost Vent/Register Blend Door Actuator - RHD(34 591 0)

    Ford Kuga Service Manual / Climate Control / Heater Core - RHD(34 364 0)

    Ford Kuga Service Manual

    Main Categories


    © 2017-2024 Copyright www.fokuman.com
    0.0093