Ford Kuga

 Service Manual

Engine- 2.5L Duratec (147kW/200PS) - VI5
Camshafts  (21 284 0)

Special Tool(s) / General Equipment

303-1178 Timing Tool Camshaft

Punch

Materials

Removal

1. Refer to: Camshaft Seal (303-01 Engine - 2.5L Duratec (147kW/200PS) - VI5, Removal and Installation).

3. Remove the Special Tool(s): 303-1178

4. General Equipment: Punch

5. Loosen each bolt 2 turns at a time until all bolts are removed.

Installation

1. Refer to: Valve Clearance Adjustment (303-01 Engine - 2.5L Duratec (147kW/200PS) - VI5, General Procedures).

2. - X = 15 mm.

3. Apply a thin coating.

Material: Engine Oil - 5W-30 (WSS-M2C913-C) engine oil

4. Material: Flange Sealant - Anaerobic LP (WSK-M2G348-A7 / 5U7J-M2G348-BA) sealant

5. Tighten each bolt 2 turns at a time.

Torque: 17 Nm

6. Install the Special Tool(s): 303-1178 Torque: 10 Nm

8. Refer to: Camshaft Seal (303-01 Engine - 2.5L Duratec (147kW/200PS) - VI5, Removal and Installation).

Engine (Component Location)

Engine (Overview)

Engine (System Operation and Component Description).

Valve Clearance Adjustment

Intake Manifold (21 183 0) Removal

Crankshaft Front Seal  (21 467 0)

Valve Stem Seals  (21 238 0)

Timing Belt (21 304 0)

Camshafts  (21 284 0)

Camshaft Seal (21 288 0)

Oil Pan (21 154 0)

Oil Pump (21 714 0)

Exhaust Manifold (21 187 0)

Cylinder Head (21 163 0)

Crankshaft Rear Seal (21 468 4)

Oil Cooler

Engine - Vehicles With: 5-Speed Automatic Transaxle (AW55)

Engine Accessories

Engine

Cylinder Head

Engine

Engine Accessories (21 139 4)

Engine - Vehicles With: 5-Speed Automatic Transaxle (AW55)