Ford Kuga

 Service Manual

Engine- 2.5L Duratec (147kW/200PS) - VI5
Intake Manifold (21 183 0) Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Refer to: Fuel System Pressure Release (310-00 Fuel System - General Information, General Procedures).

2. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).

3. Refer to: Air Cleaner (303-12 Intake Air Distribution and Filtering - 2.5L Duratec (147kW/200PS) - VI5, Removal and Installation).

CAUTION: Make sure that the inside of the pipe ends are clean and free of oil residue.

1. Torque: 10 Nm

2. Torque: 4 Nm

3. Torque: 10 Nm

8. Torque: 10 Nm

12.Torque: 10 Nm

14.Torque: 19 Nm

Installation

1. To install, reverse the removal procedure.

2. Refer to: Door Window Motor Initialization (501-11 Glass, Frames and Mechanisms, General Procedures).

Engine (Component Location)

Engine (Overview)

Engine (System Operation and Component Description).

Valve Clearance Adjustment

Intake Manifold (21 183 0) Removal

Crankshaft Front Seal  (21 467 0)

Valve Stem Seals  (21 238 0)

Timing Belt (21 304 0)

Camshafts  (21 284 0)

Camshaft Seal (21 288 0)

Oil Pan (21 154 0)

Oil Pump (21 714 0)

Exhaust Manifold (21 187 0)

Cylinder Head (21 163 0)

Crankshaft Rear Seal (21 468 4)

Oil Cooler

Engine - Vehicles With: 5-Speed Automatic Transaxle (AW55)

Engine Accessories

Engine

Cylinder Head

Engine

Engine Accessories (21 139 4)

Engine - Vehicles With: 5-Speed Automatic Transaxle (AW55)